
Ready to bring your robot dog to life? Everything you need—tested, durable, and beginner-friendly—is right here in one complete kit.
Full Parts Kit
| Section | Part Name | Quantity | Notes |
|---|---|---|---|
| Hardware | M2.5x25 socket head cap screw | 10 | |
| M2.5x10 socket head cap screw | 100 | ||
| M2.5 heat-set tapered threaded insert | 100 | ||
| M3x8 cap head screw | 50 | ||
| Squash ball double yellow dot | 4 | Dunlop competition ball | |
| Brain Electronics | 4x4in Waveshare HDMI Raspberry Pi screen | 1 | |
| Raspberry Pi 5 8 GB | 1 | ||
| Raspberry Pi AI kit | 1 | 13TOPS. Kit includes 2x20 female header extension. | |
| M.2 adapter board for AI kit | 1 | ||
| Pi hat control board | 1 | Custom Pupper V3 PCB | |
| USB Flash drive 128 GB | 1 | Samsung drive (Must be formatted to FAT32 for RPi 5). | |
| Arducam IMX296 | 1 | 1.58MP Color Global Shutter Camera Module | |
| Fisheye lens | 1 | Arducam M12 Mount 0.76mm Focal Length Lens | |
| Lens holder | 1 | Arducam 7mm Height M12x P0.5 Metal Lens Mount | |
| Speaker | 1 | PH2.0 connector, 3W, 4Ohm | |
| Other Electronics | Power distribution board | 1 | Custom Pupper V3 PCB |
| Ear servos (SG92R) | 2 | Use with adapter cables. | |
| Actuation | Steadywin GIM4305 with SHS driver | 12 | Pre-flashed firmware, pre-set CAN ID & parameters. |
| Cables | 12" (30cm) ZH1.5 6-pin cable | 6 | 2 spares |
| 8" (20cm) ZH1.5 6-pin cable | 6 | 2 spares | |
| 6" (15cm) ZH1.5 6-pin cable | 6 | 2 spares | |
| 6" (15cm) ZH1.5 10-pin cable | 2 | 1 spare | |
| 10mm cable wrap braided sleeving | 1 | 10 meters, black | |
| 8" (20cm) SH1.0 7-pin to Dupont cable | 2 | 1 spare. For firmware flashing. | |
| 4" (10cm) PH2.0 3-pin to Dupont cable | 4 | 2 spares. For ear servos. |


